81 lines
2.6 KiB
Markdown
81 lines
2.6 KiB
Markdown
---
|
|
description: >-
|
|
In this lab, we set up our Windows workstation and PfSense firewall on
|
|
vSphere.
|
|
---
|
|
|
|
# Lab01 - Environment Setup
|
|
|
|
## Add a Network Adapters in VSphere:
|
|
- Power off the machine
|
|
- VM Hardware Section -> Edit
|
|
- Add New Device -> Network Adapter
|
|
- Change interface to either WAN or LAN
|
|
|
|
|
|
## FW01
|
|
Before powering on, check the network interface configuration (1:WAN 2:LAN)
|
|
|
|
### Configure IP Addresses
|
|
- Should VLANs be set up no: **n**
|
|
- Enter the WAN interface name: **em0**
|
|
- Enter the LAN interface name:**em1**
|
|
- Do you want to proceed:**y**
|
|
|
|
- Select Option 2 to Set IP Addresses, Pick 1 - WAN em0
|
|
- Configure IPv4 address WAN interface via DHCP?: **n**
|
|
- Enter your new WAN IPv4 address: **10.0.17.104**
|
|
- Enter the new WAN IPv4 subnet bit count: **24**
|
|
- For WAN enter the new IPv4 upstream gateway address of **10.0.17.2**
|
|
- Configure IPv6 address WAN interface via DHCP6?: **n**
|
|
- Enter the new WAN IPv6 address: **<ENTER> for none**
|
|
- Do you want to revert to HTTP as the webConfigurator protocol? : **n**
|
|
The console screen should now show a static IP address of 10.0.17.104/24 for em0:
|
|
|
|
|
|
Now we need to set the IP address for the other interface em1.
|
|
Select Option 2 again.
|
|
- Pick interface 2 - LAN (em1)
|
|
- Enter the new LAN IPv4 address: **10.0.5.2**
|
|
- Enter the new LAN IPv4 subnet bit count: **24**
|
|
- For a LAN press <ENTER> for none: **<ENTER>**
|
|
- Enter the LAN IPv6 address: **<ENTER>**
|
|
- Do you want to enable the DHCP server on LAN?: **n**
|
|
- Do you want to revert to HTTP as the webConfigurator protocol? : **n**
|
|
|
|
|
|
|
|
|
|
## WKS01
|
|
|
|
### Rename this Windows Computer
|
|
* In File Explorer, right-click on “This PC”
|
|
* “Properties” -> “Change Settings”
|
|
* Click “Change” next to “To rename this computer…”
|
|
* rename to `wks01-charlotte`
|
|
|
|
### Add a user
|
|
* Computer Management -> Local Users and Groups -> Users
|
|
* Right Click -> New User
|
|
* `charlotte:password123`
|
|
|
|
|
|
### Add a User to a Group
|
|
* Go to user Properties -> Member Of -> Add
|
|
* Type the group name: `WKS01-CHARLOTTE\Adminstrators`
|
|
* Check names, if the text entered is a valid group, the text should underline
|
|
|
|
### Change IP Address
|
|
* Go to Network and Internet settings -> Change adapter options
|
|
* Right-click on network adapter - “properties”
|
|
* Double-click IPv4 setting
|
|
|
|
|
|
|
|
### PFSense GUI (web)
|
|
The default username/password is admin/pfsense
|
|
|
|
|
|
|
|
|
|
new admin password: password123
|